Jumbo Size High Speed Flexo Printing Slotting Die Cutting Machine
2200x5200mm
Technical parameters:
Max. sheet: 2200x5200mm
Min. sheet: 500 x 1800mm
Max. Printing area: 2200x5200mm
Min. Printing area:500x1800mm
Paperboard thickness: 3-9mm
Design speed: 40 sheets / min.
Dimension: 39210 x 8530x2500mm
Total power: 325.2KW
Total weight: 168.26 Tons
Iron wall thickness: 90 mm
Cliche thickness: 3.4mm, 3.7mm, 3.8mm,7mm.
Printing tolerance: +1.5mm
Folding error:+1.5mm
Feeding Unit
Edge feeder device
A.Front feed mechanism, feed accurate, fast.
B.The leading edge is the width of the front board as positioning
reference, without affecting the width of error of cardboard cut in
line printing, slotting, die-cutting of locating datum
requirements. Electric tone block box.
C.Has a higher processing capacity of thin cardboard delivery. (E,
B-watt cardboard can be smoothly fed).
D.Suction outlet air flow from the inverter control, air volume can
be adjusted according to the size of cardboard, Alice degree bend,
easy to adjust, fast and freely.
Machine clutch
Single button switch control electric machine separation and
combination, along with automatic alarm device, the road between
the continuous ringing alert to ensure the safety of personnel.
Feed roller
A.Send the paper roll is inserted using a single channel trench
roller, wear rubber buffer selection, dynamic balance correction,
to ensure smooth feeding and accurate.
B.Lower feed roller embossing roll steel, hard chrome plating, wear
balancing correction.
C.Use upper and lower feed rollers gap Oldham type trimming device
wrench adjustment dial display.
Automatically reset to zero means
Features of Electrical Control System
- More than 95% electrical components of this auto flexo printer
slotter die cutter and stacker are world famous brands.
- The control center is equipped with Simens PLC and single color
touch screen which come with high reliability, low failure rate,
high efficiency and easy operation.
- The main motor utilizes frequency converter to adjust speed, which
is stable and power saving. Touch screen makes operation more
convenient.
- All kinds of parameters setting and display are completed by
computer.
- Phase position and slotting height is controlled by frequency
converter, ensuring high precision.
- During feeding, the ink roller will automatically down. When
feeding stops, it will automatically go up. Since that, the waste
of paperboard can be reduced.
- The auto flexo printer slotter die cutter and stacker can store and
memorize numerous orders. If connected with computer, the memory
size will considerably increase.
- It can also implement order and customer management as well as
report printing.
- Remote maintenance and parameter modification can be realized.
