*Lead Edge Feeder with strong vacuum transfer for precise and
stable feeding.
*Dust removal system with brushes and anti-static device and
segmented vacuum sheet cleaner.
*Feeding rolls gap and side guides are motorized and PLC control.
*Main motor is protected from starting up when units are not fully
closed and locked.
Printing Unit
*Roll to Roll transfer, high adaptability of jumbo board, transfer
more precisely, improve chromatical precision.
*Pneumatic clutch is adopted on anilox roller
*Transverse register is digitally controlled by motor and PLC.
*Automatic cleaning function guarantees ink recycle and cleaning
more easily and quickly.
*Ink leaking & splashing proof system.
*Automatic resetting after cleaning the printing plate.
*Rubber roller inking system
OPERATION MANUAL
Chapter 1 Security Measures
1. Use according to the specification
Please use adhesives that meet the requirements: hot-melt
pressure-sensitive adhesives, water-based sealing adhesives.
Please use the carton die-cuts within the flatness range allowed by
the machine, such as the samples provided by the user.
Operate the device in accordance with the safety technical
regulations.
If it is not used according to the regulations, there may be bodily
injury or even life-threatening danger to the user and the third
party, as well as equipment and other property damage.
2. Prohibited operation methods
◇It is not allowed to operate the equipment as follows
Power sources not included in the terms of use.
Use adhesives that have the right impact on the operator included
in the Hazardous Goods Regulations.
Use user-modified mechanical facilities.
3. Allowed operation mode
◇Only allowed to operate equipment as follows
After reading through this operation manual for a reasonable
understanding.
Follow the procedure specified in this operator's manual.
The device may only be used as specified in this operating manual.
Other uses beyond the scope, such as the use of other adhesives and
dangerous goods that are harmful to health beyond the regulations,
are considered to be beyond the regulations.
4. Requirements for personnel
Workers on powered components must pay attention! Do not allow
dangerous sports to injure yourself or others. Users may only
assign work on powered components to personnel assigned to the work
and they are able to:Complete work independently and reliably.
Under the supervision of a person skilled in the job after prior
training.
If untrained personnel do not operate the equipment in accordance
with the regulations or use the equipment not in accordance with
this operating manual, the equipment may be dangerous......
